Callsign

Cash Donations (Exclusive of Station Support Assessments)

Equipment Provided to PJ2T

Labor Donated to PJ2T

• RigBlaster Pro

• 6 RigRunners 

• 60% donation of 14 inch flat screen monitor

• Heat shrink gun and assortment of tubing, added to in July 2008

• Many electronic components

• Much assorted West Mountain Radio equipment

• Supply of PowerPole connectors

500.00 donation toward new bed for West bedroom

275.00 donation toward RigAnalyzer, July 2014

496.43 donation toward Europe Tower Replacement Fund, Summer 2016

300.00 donation to Europe Tower fund Feb 2017

363.76 donation to Europe Tower fund Dec 2017

2000.00 donation to Europe tower fund Mar 2018

• Bencher Skyhawk tribander

April 2005: Large (amount not disclosed at Mal's request) unrestricted cash donation

June 2006: Another very large unrestricted cash donation

Third large cash donation toward the outside maintenance fund

June 2008: Large cash donation, unrestricted, in connection with membership renewal. 

June 2010: Large cash donation, unrestricted, in connection with membership renewal. 

ARRL DX CW club charges Feb 2011 - check written well over the specified amount

May 2011: Large cash donation to buy four new Dell Inspiron 560 PCs.

November 2016: $3000 cash donation toward cost of Year of the Shack project

1000.00 donation toward Europe Tower fund April 2018

• Three tables for the stations

• Coax jumper cables for CQWW CW 2002 M/M operation

• MFJ-259

• Uni-T UT60 Digital Multimeter

~$750 cash donation October 2016

366.50 donation to Europe Tower fund Nov 2016

$800 cash donation for climbing harness, May 2021

• A3W-S tribander
• Two long lengths of Heliax, 250 ft and 146 ft from VA3OJ

$500.00 donation to Europe Tower fund June 2018

Bencher paddle

195.00 donation to Europe Tower fun through Arizona Outlaws

• All labor and parts on research and rebuild of A-3S South America tribander

$175 toward antenna switching system

High voltage probe and two tape measures, September 2015

Astron SS-30M switching DC supply, December 2015

WinKeyer USB, December 2015

20 and 40 meter shorted 1/4 wave coax stubs

Microbit Remoterig WiFi Interface 1258-N

K3 ACC port Y-cable

$450.00 Europe tower fund January 2017

• Two Bencher paddles, May 2021

• ARRL Handbook

• 317 ft new Andrew LDF4 50 ohm 1/2 inch Heliax

25.00 for FT-1000 shipping

180.00 for flat screen monitor at Station # 1 (April 2009)

100.00 donation in November 2012 and again in December 2012

200.00 donation (December 2013) toward new desk chair with arms

300.00 donation toward K3 matching gift from KB7Q

• Two coax switches

• Four Citel surge protectors

• Samlex SEC-1212 12 volt 10 amp DC power supply for Omni-VI + Ten-Tec cable

• APC Surge Arrest Professional

• Bencher paddle

• Clark Electronics (K1FZ) KB-4 Splitters (5)

• KD9SV antenna switches/preamps (2)

• W3NQN 160 bandpass filter

• INRAD Filters for Omni VI (400, 250)

• Ten-Tec 250 Hz filter, 6.3 MHz IF (#221)

• West Mountain RIGRunner 4005 and connectors

• K9AY 4-direction switching

• K9AY mechanicals

• 375 feet rotor cable to control K9AY switch

• "DXing on the Edge"

• K1FZ Beverage transformer

• Amidon UNUM transformer box for 160 Inv-L

• Comtek Radial Ring

• "Reducing Interstation Interference," W2VJN

• 500 ft #12 stranded insulated blue wire

• 1500 ft UV-resistant antenna rope

• Many Amphenol coax connectors and adapters

• New ham radio books for PJ2T Bookshelf, including ON4UN "Low Band DXing" and many others

• WX0B IBS-1 Band Decoder and cables, for future auto switching at Station # 3

• Pennant Antennas: 12 fiberglass mast sections, 4 guy rings, 200 feet of pennant wire, K1FZ KB-4 Hybrid Splitter, 2 pennant matching transformers (18:1), 4 FT240-F toroids, Elbert County 160/80 remote preamp, termination resistor pots, 300 feet RG-8X

• WX0B Inv-L static suppression inductor

• Many batteries for the radio closet

• 4 decks playing cards

• Two CW filters for FT-1000 sub receiver

• Curacao flags

• ARRL flag

• 50% ($850) of cost of DX Engineering RX array

• Three Radio Shack foot switches

• DX Atlas license, October 2009

• 50% of cost of 20 inch monitor for Station # 2, Dec 2009

• Digital frame with QSL correction

• Logitech C920 web cam and USB extension cable

• Two Kool-Amp muffin fans Jan 2014

• HP three in one printer HP M127fn, June 2016

369.20 Rohn 45 top section and 500 feet rotor cable

325.00 in response to Nov 2001 assessment

400.00 unrestricted donation

200.00 unrestricted donation

100.00 unrestricted donation

475.00 unrestricted donation

575.00 unrestricted donation May 2008

425.00 unrestricted donation 6 June 2011

496.43 donation to Europe Tower fund June 2018

• 6 sections of Rohn 45 tower, including guy brackets, equalizer plates and hardware

• 1150 ft 1/4 inch EHS guy wire

• Climbing belt

• Many pairs of work gloves

• Numerous tower-building aids, such as Anti-Sieze, small hand tools, carabiners, antenna straps (nylon), rope clips

• Snatch block pulley, block and tackle pulley

• Gin pole by WB0W -- 50% share

• Rohn 45 tower base and top plate

• Comealong winch

• 300 feet rotor cable, used for DC control lines

• New Hy-Gain rotor motor, Cush Craft loading rod bracket kit, insulating rod for 40 meter driven element, shipping on above via FedEx to island

• 36 1/4 inch EHS deadends

• 2000 ft of #16 stranded, teflon-coated radial wire

• Hy-Gain rotor control box with Rotor-EZ modification installed

• Complete set of replacement components for StackMatch control box

• Hy-Gain D-shell clamp and boom to mast clamp

• Another Hy-Gain rotor control box, installed, May 2009

• Rohn hardware shipped to N1ZZ, January 2011

• Two weeks of sweat labor, mostly 100 feet in the air, building the towers and erecting yagis, June 2001

• Labor installing Rotor-EZ modification and RS-232 interface in three T2X rotor control boxes

• $108 cash donation June 2012

• Two hand made 160 meter UNUM transformers Photo

• Two HPS power transformers for better AC regulation ($808 value), from WTS and Zero Layer Power Systems

• Water dam aluminum plate cutting

• Cable reel aluminum reel, custom machined

200.00 unrestricted donation

325.00 in response to Nov 2001 assessment

• First aid kit

120.00 - half of 20 meter stack box

120.00 storage fees

500.00 unrestricted donation

200.00 supplemental storage fees donation

3333.00 unrestricted donation

52.00 import duty on AL-1200

50.00 for N7BG Heliax

325.00 in response to Nov 2001 assessment

30.00 for FT-1000 shipping

• 250 feet rotor cable

• Four weeks of sweat equity on initial station construction and tower and antenna building

50.00 for FT-1000 shipping

• IC-505 six meter all mode transceiver

• Many assorted coax N connectors

• Simpson VOM

• Assorted antenna insulators

• Pair of Alinco DJ-S11 handhelds

• Amphenol right angle connectors

• Radio Shack 25 amp switching power supply

• Many antenna insulators

• Simpson 260 VOM

• Considerable cable connector sealing tape

• Misc BNC cables

200.00 unrestricted donation

325.00 in response to Nov 2001 assessment

ARRL CW 2006 plaque sponsored, World 21 MHz CW

240.00 donation in connection with ARRL DX CW 2008

NUMEROUS contest plaques, continuing into 2009

ARRL DX CW club charges Feb 2011 - check written over the specified amount

$546.40 toward 2011 new Dell computer purchases

$205 for August 2014 PJ2T QSLs

2000.00 donation to Europe Tower fund February 2018

• TS-930 transceiver

• Used 3CX800A7

$1000 unrestricted gift, Summer 2016

• Alpha 76 linear

• Bytemark KW BALUN

• MFJ-259B (2) Feb 2018

• Rohn 55 equalizer plate

• Element pieces for Hy-Gain 20 meter yagi May 2019

92.00 duty on WARC yagi

110.00 unrestricted donation

500.00 unrestricted donation

100.00 unrestricted donation

94.70 MODEM for computer at Station # 2

100.00 excess baggage charges to take computers to CUR

1985.00 Rohn components for shipment

97.43 duty on computers

96.64 parts for W9VA TS-930

107.67 rebuild of rotor

50.00 excess baggage charge for hauling wiring duct to CUR

200.00 unrestricted donation

984.74 Ryder truck rental to MIA

208.35 airfare from FLL to CLE for W0CG

222.18 fuel for rental truck

2207.05 ocean freight

477.19 port tax on shipment

992.05 import duty for shipment

680.00 surcharges on shipment

140.00 local delivery on CUR for shipment

102.08 Three APC Professional surge arrest strips

46.60 shipping of QSLs to members

38.38 stainless steel hardware for truss project

239.60 Eight Daiwa coax switches and all aluminum panel stock and hardware

80.65 two component paint for towers

125.00 excess baggage charges for antenna truss kits

41.79 ferrites and fuses

139.79 CATS rebuild of antenna rotor

79.72 duty on Pentium computers

240.00 Top Ten band decoder and antenna switch box

74.29 plywood for shipment and concrete forms

1760.00 for excavation, concrete, labor on tower bases

35.00 overweight charge an Alpha 78 baggage

32.00 import duty on Alpha 78

50.00 for N7BG Heliax

325.00 in response to Nov 2001 assessment

32.95 for another Daiwa CS-201 coax switch to switch 75 vee at Station # 1

139.24 Hosfelt Electronics for fuses, receive antenna boxes and components, ferrites, tie wraps, muffin fans, computer cables, relays for W3NQN panel

56.25 new filament transformer for AL-1200

139.24 fans and parts for RX boxes, ferrites

23.90 parts for TS-940 repair

44.23 Daiwa coax switch for 75 vee

33.00 shipping of EN-710 monitor to WC4E

95.00 for Piexx TS-940 serial interface (K3TUP radio)

14.00 shipping of computer to W0NB

39.00 shipping of computer to K1AR

60.00 DVD blanks for N8BJQ project

15.00 shipping of TNC to W2CQ

75.00 50% of Dayton meeting room 2003

50.00 for FT-1000 shipping

175.00 for Titan III shipping and duty, October 2006

500.00 to defray expenses of KD0MND, September 2013

205.00 for August 2014 PJ2T QSLs

200.00 toward KB7Q Elecraft transceiver match grant

1000.00 Europe tower fund Feb 2018

• TS-940 for Station # 3

• TS-940 for Station # 1 and backup

• Rebuild costs by CATS of three rotors

• 205-BAS yagi

• 205-BAS yagi

• 205-BAS yagi

• XM-510G yagi

• XM-510G yagi

• Six meter yagi, new, Cush Craft

• A-3S triband yagi

• A-3WS WARC triband yagi

• 40-2CD 40 meter yagi

• Ringo Ranger ARX-2B vertical

• All tubing and hardware to install W6QHS reinforcements in 40-2CD

• K8DX five element 15 yagi on 48 foot boom and misc 3 inch boom sections and hardware

• 6 sections Rohn 55G tower

• Hardware for tower bases

• Two 486 laptop computers

• Three B & W coax switches

• Top-Ten Devices Band Decoder

• Aluminum panel stock and all hardware for coax entry panels

• CT network cabling system components, assembled by K8RF

• RCS-8V antenna switch

• 486 DMI minitower computer with 14 inch monitor

• IBM Pentium desktop system

• IBM Pentium desktop system

• 17 inch IBM monitors (two)

• Complete set 25G guy cable, guy brackets, and equalizer plates

• 2500 ft insulated #14 Cu for radials and antennas

• Two new come-along hand winches

• 600 ft yellow poly rope, 1/2 inch, new

• Hubbel wiring duct (35 linear feet), all fittings and fixtures, and all wiring

• 2000 VA stepdown transformer

• 800 VA stepdown transformer

• 16 new Amphenol Type N female connectors

• Two coax switches

• Four yellow rope reels and rope, 250 ft each

• Six sections Rohn 25G tower

• 160 meter inv vee

• 8333 IF CW filter for Zilko TS-940

• Dell Inspiron 3215 Windows 8 laptop, October, 2013

• Labor to build W3NQN filter panel for Station # 1

• 16 weeks sweat labor for station building

• Labor to build all coax pigtails for all antennas prior to shipment

• Fabrication and installation of antenna boom truss kits

• Installation of coax switching system

• Installation of CT serial network

$100 refrigerator donation, July 2011

$75 cash donation May 2012

• Six HP wheel mice

• 200 ft .075 Kevlar for 160 Inverted L

• Five sets contest tee shirts for teams

• Brother label maker

• 80 meter vertical

• BNC - PL-259 adapters (6)

• Two HP 20 inch flat screen monitors for Stations 3, 4, November 2011

• Parts ($350) and labor for power console

• 50 ft RG-11 coax

• 600 ft 1/2 inch Heliax, July 2019

100.00 donation to Europe Tower fund Non 2016

• 2 hardline connectors for RG-218/U

• 2 rack panels, black crinkle
• 40 rolls electrical tape, December 2011

• Type HN connectors and PL-259s, new

• Multiple Amphenol PL-259, barrels, tees, and bulkhead connectors; June 2013

20 PL-259s and 10 RG-58 adapters, September, 2015

1000.00 unrestricted donation, 2004

120.00 storage fees

500.00 unrestricted donation

200.00 unrestricted donation

300.00 unrestricted donations

42.00 duty on 17 inch computer monitor

325.00 in response to Nov 2001 assessment

20.00 cash for FT-1000 shipping

ARRL DX CW club charges Feb 2011 - check written well over the specified amount

• Multiple fans for station

• Paint and hardware for towers

• Electric fence poles and insulators for Beverage

• Amidon TVI reduction kit

• Folding table for additional station on porch

• Tablecloth and place mats 

• 100 feet flexible conduit

• New band switch assembly for Titan II ($99.80)

• Five weeks of sweat labor on three separate trips to renovate house and build towers and prepare for contests.

• Ceaseless work on the station during contest operations.

• Repair of five linear amps prior to CQWW CW 2002

• Repair of floor fan

• Repair of security system keylock

• 154-BAS yagi

• Stackmatch switch assemblies

• Inv vee W1JR-50-3 BALUN

• Elecraft K3
• Bencher paddle

• $750 cash donation December 2015

• LG 22 inch monitor, November 2016

• $38.00 duty on dishes, WTS transformer, guy wire

• 350 feet RG-8X coax with connectors

• 30 rolls electrical tape

• Large bag tiewraps

• 2 56K PCI internal MODEMS

• 6 universal ISA universal interface cards

• 1 PCI Ethernet adapter card

• Set of hand tools, in carrying case

• CD player

• 15 sets Heil Proset ear covers

• Complete set of CL-33 traps (Feb 2013)

75.00 unrestricted donation July 2009

• Foot switch

• Heil mic/cable adapter (Yaesu)

• Bag of PL-259, tie wraps, batteries

• FT-100 transceiver

• Canon BJC-2100 printer

• Various rigging supplies and cable chemicals

• Complete set of CL-33 traps

• StackMatch Spare Board

• 3 7/8 inch hardline connectors

• 160 feet new 7/8 Heliax, two connectors, and UPS shipping costs to Miami, March 2008

• Yaesu FH-2 remote keypad (Feb 2010)

• Heil Proset Plus (Feb 2010)

• MFJ 434B voice keyer (Feb 2010)

• Heil pigtail adapter for Yaesu

• Three sets of tower leg splint kits, March/April 2010

• Four sets tower leg splints and shipping, December 2011

• Tower splints and Rohn 55 guy bracket, May 2013

• 8 assorted 1/2 inch Heliax hardline connectors

• 2 7/8 inch hardline connectors Jan 2020

• Countless hours of tower painting work spread over a three year period
• 50% of cost of new bed in East bedroom

75.00 Station Support Fund donation May 2009 in connection with membership renewal

• Yaesu and Ten-Tec Heil Proset adapters, total of nine!

• IC-228A FM transceiver for PacketCluster

• First aid equipment and assorted medication

• Chaise recliner chair

• 50% ($850) of cost of DX Engineering RX array

• RCS-4 relay box

• Three MicroLite DXPedition DVDs

• FT-2000 at 75% discount, December 2009

$500.00 donation to Europe Tower fund Spring 2018

• 500 ft of new RG-213, shipped to W8AV
• MANY hours of engineering work and all parts and fabrication of high power remote Ridge coax switch
• Hy-Gain rotor control box ($100 value)
• Astron RS-35A power supply ($100 value)
• Three desiccant packs for Pelican cases ($36 value)

• Yaesu Micro-Tune unit, 160 meters, Dec 2009

• Numerous repair parts and modification kits and components for LK-800 and AL-1200 linear amps

• Cost of repairs to FT-1000

• $150 repair of FT-1000MP December 2009

• Yeasu Micro-Tune unit, 40/10 meters, May 2010

• New burner for PJ2T barbecue grill

• Numerous repairs of XCVRs in Ohio and numerous baggage charges on the airlines

200.00 unrestricted donation

50.00 Lowe's cash card for hardware

325.00 in response to Nov 2001 assessment

200.00 donation (May 2005) for transceiver maintenance (IC-765)

• Toshiba laptop computer, mouse, and Sony CD drive

• Ham IV rotor and control box

• QRZ Industries voice keyer

• Numerous computer boards

• 95 feet 7/8 inch hardline for six meters

• Gin pole by WB0W 50% share

• 450 ft RG-213 coax for interior switching system

• Icom IC-2A HT

• Timewave DSP-9

• Linksys five-port Ethernet hub for backup

• An ISA COM port board

• Several Hardline connectors for 1/2 inch Heliax

• Electrical tape, Phillystran deadends and misc pieces of Phillystran

• Miscellaneous tower goodies such as turnbuckles

• Two Drake low pass filters

• Top Ten Six-Way outdoor coax switch

• CDR-W drive, LPT1 switch box, two Heil boomsets

• 450 feet RG-213, new

• Ramsey Electronics 20 meter XCVR and amp kits

• Hamfest items: Dell Optiplex GX Pro desktop PC, Toshiba 205CDS laptop PC, WinTV Model 190 video capture card (new in box), Addionics WebShuttle internet sharing device (new in box), Video Director video editing tool, Kenwood TS9130 2 meter all mode transceiver, Linksys 5 port Ethernet hub, USR 56K Sportster FAX MODEM, TV card and driver software for PC, Quickpix Qp2 Nisis camera and software, Assorted red and green LEDs, Pinnacle Systems PCTV Deluxe Video Capture adapter and software, Lots and lots of super books, paper and hardback, for the QTH.

• IC-765 transceiver

• Ameritron ARB-704 linear amp control box (Feb 2010)

• Two weeks of sweat labor,  building the towers and erecting yagis

340.00 Phillystran and shipping costs

285.00 Ham IV rotor, used

320.00 four new Rohn TB-2 thrust bearings

40.00 fuel donation for Ryder rental

325.00 in response to Nov 2001 assessment

151.00 for FT-1000 shipping

100.00 donation with membership renewal, June 2005

300.00 donation in connection with ARRL DX CW 2008

30.00 donation for rotor box, May 2009

Picked up cost of CATS repair of CCC Rotor 4, December 2012

• All coax connectors for indoor switching

• Most of the egg insulators for guy wires

• Alpha 78 linear, owned by W8TK and provided to PJ2T from the W8AV station

• Two new Cablewave Heliax connectors - 7/8 inch, for six meters

• Ham IV rotor

• 8 sections of Windcharger tower

• Five element 10 meter yagi, subsequently rehabilitated by N8LGP

• Tool box

• Tower obstruction light assembly

• Picked up cost of 300 ft of 6700 pound Phillystran for tower guys

• 100+ ft of 213, with connectors

• 150 ft of 9913

• Three 8-pin Kenwood DIN plugs

• 10 SO-239 to phono plug adapters for RX antenna switch boxes

• Piexx computer interface board for Zilko TS-940

• Purchased and paid for new AL-1200 filament transformer and panel lights for meters - $80.00

• 180 feet poly twinlead for 80 Eur beam

• Hy-Gain boom-to-mast clamp

• Two Klein pork chop wire grips

• Watters rotary coax switch

• 2 rack panels (new)

• Variable voltage bench power supply

• Key set for QTH, August 2011

• Model 5015T variable voltage bench power supply

• Many hours of work putting PL-259s on all jumpers for the indoor switching system

36.00 filter donation

500.00 unrestricted donation

200.00 unrestricted donation

325.00 in response to Nov 2001 assessment

75.00 50% of Dayton meeting room 2003

$455 purchase of two new 8874s for Alpha linears

$712 cost of factory rebuild of Alpha 78 linear

$533 for repair of Alpha 78 (April 2009)

Large unsolicited cash donation during Membership Year 10

• TS-940

• Yaesu 2 meter FM transceiver

• Six keyers and four Bencher keying paddles

• Ten-Tec Centaur linear

• TS-440 transceiver

• Epson computer printer

• Alpha 78 linear

• IC-765 transceiver

• Climbing belt

• Electric circular saw

• Five LPT keying adapters

• Heil foot switch

• Complete set W3NQN bandpass filters

• Many assorted hand tools

• Custom nametags for the entire membership

• Pair of Alinco DJ-190 2 meter FM HTs and battery charger

• Handheld frequency counter

• Three new Cetron 811As for Centaur (spare tubes)

• AM signal sniffer and antenna

• Atomic clock for PJ2T

• Line voltage monitor

• Mini-keyboard

• Seven Telex headsets

• MFJ SWR and wattmeter

• TS-930 transceiver

• Omni VI Transceiver and outboard VFO control

• Daiwa CN-720 SWR meter

• Rigblaster

• Ham-IV rotor

• Two additional TS-930s and Piexx interface boards for them

• "The 2002 Radio Amateur's Handbook" and "The ARRL RFI Book", new August 2002.

• Envision EN-710 17 inch monitor, new

• 8333 IF 400 Hz IRC crystal filter for TS-930

• SX-99 SWL receiver

• Drake SSR-1 SWL receiver

• SIX Yaesu FT-1000MP  transceivers

• Two Curtis keyers

• Logikeyer (number two)

• 8874 tube ($166)

• Collins 30L-1 Linear

• W5XD Writelog MultiKeyer

• 25 amp MFJ Switching Power Supply

• Astron RS-35 DC power supply

• Many coax tees and adapters for rejection stubs

• Two new sets of Stanley screwdrivers

• INRAD mod kits for FT-1000s ($91.00)

• Approximately $700 (market value) of basement items for flea market sales

• Palstar DL2K Dummy Load (new, ~$180)

• Two Bencher paddles

• Two custom Cabbage Cases for FT-1000 shipping

• Four K1EL WinKeyers, purchased, assembled, and tested by W8TK

• 4CX1600B tube for Titan II, new

• Astron RS-35M (Jan 2006)

• Climbing harness and gorilla hook, new (Jan 2006)

• Ten-Tec Titan III Model 417 linear amplifier

• Tower Climbing and Safety textbook

• Assorted hand tools and workbench magnifying aids

• Two Idiom Press K-3 keyers

• Two butane soldering torches

• K5D DVD

• Atomic clock, balloon launcher, K7LXC tower book

1000.00 donation to Europe Tower fund Nov 2017

4000.00 donation to Europe Tower fund May 2018

• 160 meter UNUM box and RX antenna switching box

• Complete service manuals for TS-940 and TS-930

• Foot switch

• Set of Heil muffs for BM-10

• IC-706 MKII HF/VHF transceiver

• Two Daiwa coax switches

• Multiple coax connectors

• 100 feet of direct burial RG-213 for the 80 meter loop array

• Two coax switches

• AC powerline filters for computers

• Multiple barrel and quick disconnect connectors

• T2X rotor

• Remote coax switch

• New set of cookware for the QTH

• Single 3-400Z home brew linear amp and power supply

• Ham-III rotor

36.00 filters donation

300.00 unrestricted donation

325.00 in response to Nov 2001 assessment

261.00 unrestricted donation February 2007

100.00 cash toward battery operated drill September 2008

• Countless boxes of hardware and toolkits for tower and antenna construction

• Many assorted hand tools

• TA-34 XL yagi

• Four sections Rohn 25G tower

• Custom aluminum bracket for obstruction light mount

• 8 custom-built foot-switches, June 2006

• Five 2 inch Hy-Gain boom sections for 2006 antenna repair project.

• Hundreds of hours of labor to completely rebuild both 20 yagis, the 15 Europe yagi, the 10 meter Europe yagi, and the 40 meter W6QHS yagi reinforcements, including packing.

• Many hours of labor in August of 2006 to fabricate parts for PJ2T antenna repairs.

• 80 meter vertical

• Labor to construct CT network cables plus all ferrites and connectors

• Repair/rebuild of two TS-930s

• CAD-CAM production of tower drawings for building permits

36.00 filter donation

20.00 storage fees

40.00 unrestricted donation

100.00 unrestricted donation

200.00 unrestricted donation

325.00 in response to Nov 2001 assessment

• Complete comprehensive kit of plugs, adapters, connectors for DC and signal wiring

• Telephone

• Many assorted hand tools

• Hampton track lighting kit

• D-Link DI-604 gateway

• CD ROM drive

• NIC card

• Miscellaneous Ethernet cables and connectors

• Heath HM-15 SWR meter 

• Astron RS-35M (August 2013)

• Force 12 tribander (January 2019)

• One week of sweat labor to initially work on house renovation and raise the PJ9JT tower and repair the roof.

• Barrel connectors for CT BNC network

• Ham IV rotor

• Mast pipes for both towers

• Watters rotary coax switch, can type

• ISA MODEM, 500 feet RG-8X class coax, four quick disconnect PL-259s, desk lamp for Station # 3

• 100 feet RG-8/U category coax

• VOM and many assorted tools and shack goodies

• RCS-8V

• Complete set of W2VJN custom-tuned band rejection stubs

• 6 meter loop antenna

• Hard drive for DMI 486 mini tower computer

• Heil boomset

• Electronics for vertical receiving array

• Design and construction of 75 meter 3 el delta loop beam

• Winkeyer USB, December 2015

• Set of interface cables for Top Ten DX Doubler

75.00 share (after rebate) of 17 inch monitor

75.00 license for Writelog

~80.00 duty on Pentium systems

30.00 for Year 2 Writelog license

~120.00 UPS shipping costs for three Pentium PCs

~ 80.00 UPS shipping costs for two Pentium PCs

Shipping costs for three Pentium desktop PCs

Shipping for four Compaq power supplies, May 2007

• Two complete Pentium computer systems

• New 17 inch monitor

• Radial wire and 500 feet UV-resistant antenna rope

• Floor fan

• Homebrew rig control / keying serial interface for IC-765 (Sept 2001)

• AEA PK-232/MBX RTTY/Packet terminal unit, wired for IC-765 (Jan 2002)

• Envision 17 inch monitor, new, plus shipping to WA9S

• Three hard drives, 2 SoundBlasters, 1 PCI VGA, 1 NIC, 1 3.5 inch floppy drive, 1 CR-R drive, 1 ISA MODEM card, December, 2002

• Instinet SuperStack II Switch 1000 (12 ports) (NW0L)
  SN 7WLR055281

• Instinet SuperStack II Hub 10 (NW0L)
  SN 0301/7TAR245593

• CD R/W for Station # 2 computer

• Two Sony CD R/RW burners

• Netgear  WGR614 Wireless Router

• Four Canon BCI-21 black ink cartridges

325.00 in response to Nov 2001 assessment

• TS-930, currently at K8RF for repairs

• 204-BA yagi

• Daiwa SWR/power meter

• Ham IV rotor

• Complete set of interface and control boxes and cables for entire PJ2T station

• Three Top Ten A/B boxes (March 2016)

• Autek WM-1 wattmeter
• WB0W gin pole bottom clamp, October 2016

• MFJ-870 SWR/wattmeter

• Windows 7 PCs, six in total.

100.00 donation to Europe tower fund Nov 2016